A website with a Pipedrive integration

    Every form on your site creates a lead or deal in Pipedrive, with the right owner and a follow-up task. On a new site or on the one you have.

    Price
    From €3,750
    Lead time
    2 to 4 weeks
    Invoicing
    Per phase, in advance

    Pipedrive Platinum PartnerPipedrive Platinum Partner

    For teams who recognise this

    • Requests land in a mailbox and stay there.
    • We retype every request into the CRM by hand.
    • We do not know which page brings anything in.
    • Leads we end up doing nothing with.

    What you get

    • Forms into your CRM
    • Follow-up ready to go
    • Source and UTM captured
    • Revenue per page
    • No lost requests
    More of what you get

    What it delivered

    2 hours

    deadline for the first call task on every web request

    Every form submission becomes a deal in Pipedrive by itself. The result: 18% higher conversion through fast follow-up.

    Ontslagrecht Juristen Nederland, employment law

    What you get.

    • Forms into your CRM

      Every form creates a person, an organisation and a lead or deal, with the fields filled and an owner set.

    • Follow-up ready to go

      The rep gets a task right away, with a due date. Nobody retypes anything.

    • Source and UTM captured

      You know where every request came from. The full field list is further down.

    • Revenue per page

      You see which page brings in requests and which of them become deals.

    • No lost requests

      A CRM outage does not cost you a lead. How that works is explained below.

    • Tracking with consent

      You only measure what visitors allow, and forms only ask what you need.

    How it runs.

    1. Intake

      Which forms exist, what has to land in Pipedrive and who follows up.

    2. Fields and routing

      We agree per field where it goes and per form who gets the lead.

    3. Connect

      Forms and tracking tied to your CRM, on your current site or a new one.

    4. Test and launch

      Every form tested end to end with a test lead, then live.

    Price

    What it costs.

    From €3,750

    2 to 4 weeks

    You pay per phase, before that phase starts. You arrange hosting and CRM licences yourself.

    See all pricing

    To be honest

    What we do not do.

    We do not build a standalone website without a CRM behind it. If you only want a new design, a web agency is the better fit.

    How do you connect your website to Pipedrive?

    You connect your website to Pipedrive in one of three ways: with Surge Forms, by connecting the forms you already have, or with a new site built on top of your CRM. Which one fits depends on your current site and on how much you want to change.

    RouteGood forWatch out for
    Surge FormsForms that write straight into Pipedrive, with assignment and a follow-up task, without touching the rest of your siteYou replace your current forms with ours, so the styling has to match your site
    Your existing forms, connectedKeeping your WordPress site and forms exactly as they areEvery form plugin behaves differently, and each form needs its own mapping and test
    A new site on your CRMCompanies whose site needs a rebuild anyway, so forms and tracking are designed in from the startMore work and more decisions, and we only do it with the CRM integration at the core

    In the intake we look at which forms exist, how many requests come in and what has to land in Pipedrive. Usually one route is clearly the most sensible. If your site works and only the forms are the problem, rebuilding it is a waste of money.

    Does a Pipedrive WordPress integration work without a new site?

    Yes. A Pipedrive WordPress integration works on your current site, and in many cases that is the cheapest route. We leave the design and the content alone and only change what happens after someone presses send.

    In practice we connect the forms you already use, or replace them with Surge Forms where that is more reliable. Each form gets a mapping: which field goes to the person, which to the organisation and which to the deal. We then add the source and the campaign, set who gets the lead, and create a follow-up task.

    Ontslagrecht Juristen Nederland is an example. Their WordPress site stayed, and every form now creates a deal in Pipedrive. New leads go to the next lawyer in turn, and a timer creates a task when nobody has picked the lead up in time. Read the case.

    Which data lands in the CRM?

    Every request lands in the CRM with the details a rep needs to follow up, plus where it came from. This is the standard set, and we add your own fields on top.

    FieldWhere it landsWhy
    Name, email and phonePersonSo the rep can contact the right person
    OrganisationOrganisationSo requests from the same company come together
    Question or requestLead or deal, plus a noteSo the rep knows what the request is about
    SourceLead or dealWebsite, campaign, referral or another channel
    UTM parametersLead or dealWhich campaign, medium and ad brought the visitor
    PageLead or dealOn which page the form was filled in
    OwnerLead or dealSet by rules, such as region, product or in turn
    Follow-up taskActivity on the dealWith a due date, so nothing waits in a mailbox

    Per form we agree how an existing person or organisation is recognised, so your CRM does not fill up with copies. Cleaning up what is already duplicated is done by Surge Dedupe, always with a review first.

    How do you measure which page brings in requests?

    You measure it by recording every form submission as a key event in Google Analytics and writing the page and source onto the lead in the CRM. Then you see both sides: which pages get visitors to act, and which of those requests turn into deals.

    Analytics alone shows how many forms were sent per page. It does not show which of them became a customer. The CRM alone shows deals, but not which page started them. Because we write the page and the UTM values onto every lead, you can report in Pipedrive on revenue per landing page and per campaign.

    We set up the key events, the consent banner and the CRM integration together. Without consent we only measure what the rules allow, so the numbers in Analytics will always be somewhat lower than the number of leads in your CRM. That is normal and we explain it at the handover.

    What if the CRM is briefly unreachable?

    Then the request waits and is sent again, and nobody loses a lead. We build every website integration with error handling, because a form that fails quietly is worse than no form.

    A request first goes into a queue. Only when Pipedrive confirms that the lead exists is it marked as done. If the CRM is down or slow, the integration tries again later. If it keeps failing, someone gets a notification with the request, so it can be entered by hand if needed. The visitor sees a normal confirmation either way.

    Want to know more about how we build integrations like this? See software and integrations. And for what happens after the lead lands, such as routing and follow-up, see sales automation.

    In short

    In short

    Sales Surge connects your website to Pipedrive so that every request becomes a lead or deal with an owner, a source and a follow-up task. That works with Surge Forms, with your existing WordPress forms or on a new site we build. A website with CRM integration starts at €3,750 and takes 2 to 4 weeks. We do not build standalone websites without a CRM behind them.

    Source: Sales Surge price list, checked on 16 November 2026. Prices exclude VAT.

    Frequently asked questions

    What does a website with a Pipedrive integration cost?

    A website with CRM integration starts from €3,750 and takes 2 to 4 weeks. That covers the forms, the mapping to Pipedrive, source and UTM tracking, the follow-up task and testing. After the intake you get a fixed price per phase, and you pay before each phase starts. You arrange hosting, the domain and CRM licences yourself. Prices exclude VAT.

    Can you take over an existing Zapier or Make integration?

    Yes. We start with an audit, because taking over without knowing what is there goes wrong. We look at which forms feed the integration, which fields it fills, what happens when a step fails and who gets notified. After that you know whether we keep it, fix it or replace it with Surge Forms. If it works and nobody has to babysit it, we leave it alone.

    Which CRMs can you connect a website to?

    Pipedrive is what we do most, and that is where Surge Forms works. We are Pipedrive Platinum Partner. We connect HubSpot and Zoho in the same way, with their own forms or with a custom integration, and the same goes for Lumo. The fields, the routing and the follow-up task work the same, only the technical route differs per CRM.

    What is Surge Forms?

    Surge Forms is our own form builder. Its forms write straight into Pipedrive, with the right owner and a follow-up task attached, so nobody retypes a request. You embed the form on your site. It is the most reliable route when your current form plugin keeps causing problems, or when you want routing rules that plugins do not support.

    Is a website form integration GDPR compliant?

    It can be, if you only ask for what you need, explain what you do with the data and handle consent for tracking correctly. We set up the cookie banner so it does what it says, and we only measure what the visitor allows. The data then lands in your CRM, where you are responsible for retention and access. Check your privacy statement with whoever handles privacy for you.

    How quickly does a rep see a new request?

    Right away. The lead or deal is created the moment the form is sent, with an owner and a follow-up task, and the rep gets a notification in Pipedrive. How fast someone then responds is an agreement within your team. We can add a rule that creates an extra task or alert when nobody has picked up a lead within the time you set.

    See where your growth opportunities are.

    Fill in three fields. Within 48 hours you know where requests get stuck.