Lead conversion

    The leads come in. The deals do not.

    Usually the leads are fine and what happens after they arrive is not. We build the layer between the form and the first meeting.

    • Pipedrive Platinum Partner, top 8 worldwide
    • More than 150 CRM implementations
    Price
    From €2,200per part
    Lead time
    2 to 3 weeksper part
    Parts
    Marketing and Sales Automationscoring and nurture, routing and follow-up
    Invoicing
    Per phasealways before it starts

    Why do your leads not convert?

    Four causes cover almost every case we see. Each has a check you can run in Pipedrive today.

    • Follow-up is too slow.

      Check: compare the time a lead was created with the time of the first activity. If the median is more than a working day, leads go cold while they wait.

    • Every lead gets the same treatment.

      Check: is there a score or priority field on your leads, and is it filled in? If sellers work from newest to oldest, they spend as long on weak leads as on strong ones.

    • One sequence for everyone.

      Check: count the active nurture sequences against your segments. One sequence for three segments means two of them get the wrong message.

    • The handover between marketing and sales is vague.

      Check: how many leads were marked qualified by marketing and then never got a sales activity? That gap is where leads disappear.

    What we build

    A layer between the form and the meeting, inside the CRM you already use.

    • Intake that writes to the CRM

      Forms and chat that create the lead in Pipedrive with source, segment and owner, through Surge Forms or Surge Chat.

    • Speed-to-lead rules

      A fixed response time per lead type, with a task for the owner and an alert when it is about to expire.

    • Lead scoring

      A score built from fit and behaviour, with a threshold that decides when a lead goes to sales.

    • Round-robin routing

      Leads assigned in turn or by territory, so nobody waits for someone to pick them up.

    • Nurture per segment

      Sequences that match the segment and stop the moment someone replies or books.

    • One funnel report

      Lead to MQL to SQL to deal, per source and per month, the same view for marketing and sales.

    What does the process look like?

    Two to three weeks, in the CRM you already run.

    1. Week 1

      Conversion audit

      We map sources, scoring, response times, nurture and handover, and measure conversion per stage.

    2. Week 1 to 2

      Scoring and routing

      The scoring model, the assignment rules and the workflows that make sure someone responds in time.

    3. Week 2

      Nurture

      Sequences per segment, triggers on behaviour and the stop rules that end a sequence on a reply.

    4. Week 3

      Align and adjust

      The funnel report live, both teams through the agreements, and the first adjustments on real numbers.

    What it costs

    What does it cost?

    Price
    From €2,200
    Lead time
    2 to 3 weeks

    Scoring and nurture fall under Marketing Automation, routing and follow-up under Sales Automation. Both start from €2,200 and take two to three weeks. Many teams need both, and then we plan them as two phases. We invoice per phase, always before that phase starts.

    See all prices

    Honestly

    Who is this not for?

    If you get a handful of leads a month, there is little to gain here. A person can follow up five leads by hand, and a scoring model needs volume to mean anything. Then lead generation is your problem, not conversion, and outbound or better campaigns come first.

    What is lead conversion and how do you calculate it?

    Lead conversion is the share of leads that becomes a deal within a set period. The formula: deals won from leads created in a period, divided by the number of leads created in that period. Use a fixed window, for example leads from March and the deals they produced within 90 days, otherwise slow deals distort the number.

    One number for the whole funnel hides where it goes wrong. Split it into stages, so you can see which step loses the most.

    StageDefinitionWho decides
    LeadSomeone left details or showed interestNobody, it just arrives
    MQLFits the ICP and reached the score thresholdMarketing, by the scoring rules
    SQLSales spoke to them and confirmed need and timingSales, after the first conversation
    DealThere is a concrete opportunity with value and close dateSales

    A worked example. 200 leads a month. 80 reach MQL (40%), 30 become SQL (37.5% of MQL), and 6 deals are won (20% of SQL). Overall lead conversion: 6 of 200, so 3%. The biggest drop in absolute numbers is lead to MQL, but the most expensive one is MQL to SQL, because those are leads you already paid to qualify. That is where we usually start.

    How fast should you follow up a lead?

    Follow up within a fixed time that you can actually keep, and measure it. For inbound requests that is usually the same working day. A fast first reply matters less than a reliable one: a promise of five minutes that turns into two days on Fridays does more harm than an honest four hours.

    The agreement has three parts. A response time per lead type. An owner per lead from the moment it arrives, assigned automatically. And an escalation when the time is about to run out, so a lead never depends on one person's inbox.

    Ontslagrecht Juristen NL is the example we use. Every new request gets a call task within 2 hours and leads are assigned round-robin to the lawyers. That gave 18% higher conversion. The rules are simple. What makes them work is that the CRM enforces them instead of a weekly reminder. For website chat, Surge Chat qualifies the visitor and sends the lead to Pipedrive with the conversation attached. For forms, Surge Forms creates the lead with an owner and a follow-up task.

    How do you build lead scoring that works?

    Build scoring from two parts: fit, which says whether the company is a match, and behaviour, which says whether they are interested now. Keep it small. Five to eight criteria that sales recognises beat thirty that nobody can explain. Here is an example model.

    CriterionTypePoints
    Industry in ICPFit+20
    Company size in rangeFit+15
    Role is decision maker or influencerFit+15
    Requested a demo or priceBehaviour+30
    Visited pricing page twice in a weekBehaviour+10
    Opened a nurture emailBehaviour0, opens are unreliable
    Student, competitor or personal email addressFit−50

    Threshold: 50 points makes an MQL and creates a task for sales. Review the model after a quarter by comparing scores with deals that were actually won. In Pipedrive you build this with a number field, automations and if needed Make. Our article on AI lead scoring in Pipedrive shows how AI can add the behaviour part.

    MQL to SQL: how do you make the handover hard?

    Make the handover hard by writing it down as an agreement between marketing and sales, with times and consequences, and building it into the CRM. Here is an example agreement.

    • Marketing delivers an MQL only when the lead reaches the score threshold and has a valid business email address.
    • Sales accepts or rejects every MQL within one working day. Rejected means a reason from a fixed list, not silence.
    • An accepted lead gets a first sales activity within two working days, or it goes back to the round-robin.
    • Rejected leads with reason 'not now' go back into nurture automatically. Leads with reason 'no fit' leave the funnel.
    • Once a month, both teams look at the same funnel report and adjust the score threshold if needed.

    The rejection reasons are the most useful data in the whole funnel. They tell marketing exactly which leads to stop sending. For the reporting side, Surge Reports shows conversion per stage and per source across pipelines.

    Which CRM setup helps lead conversion optimization?

    The CRM you already have is usually enough. Lead conversion optimization depends less on the system than on three rules built into it: routing, so every lead has an owner the moment it arrives; scoring, so sales knows where to start; and a response time with an alert, so nothing waits unseen. Pipedrive, HubSpot and Zoho can all do this.

    Switching CRM rarely fixes conversion on its own. If the rules are missing, a new system just gets the same gaps. We build them in the CRM you run today, and only advise a switch when the current one cannot hold the data you need.

    What does better lead conversion deliver?

    At Ontslagrecht Juristen fast follow-up gave 18% higher conversion, and at Evans & Watson response to leads went up 30%. Both come from the same thing: leads you already paid for stop going cold. What it delivers for you depends on your volume, your deal size and where the biggest drop sits today. We know that after the audit, not before.

    This page describes the problem and how to measure it. The work itself is our Marketing Automation service for scoring and nurture, and Sales Automation for routing and follow-up. Want AI to handle the first qualification? See AI sales agents.

    In short

    How do you improve lead conversion?

    Lead conversion is the share of leads that becomes a deal. You improve it by fixing what happens after a lead arrives: follow up within a fixed time, score on fit and behaviour, route automatically and agree when marketing hands over to sales. We build that in your CRM from €2,200, in two to three weeks. With only a handful of leads a month, generation is the problem.

    Frequently asked questions

    What is a good lead conversion rate in B2B?

    We do not quote a benchmark, because published B2B averages mix industries, deal sizes and definitions of 'lead' so much that they say little about your funnel. A demo request and an ebook download are both leads, with very different odds. Measure your own baseline per stage over a fixed window, then improve the stage with the biggest drop. Progress against your own number is the one that counts.

    What is lead scoring?

    Lead scoring gives every lead a number based on how well it fits your ICP and how interested it seems, so sales knows where to start. Fit covers things like industry, company size and role. Behaviour covers actions like requesting a demo or visiting the pricing page. Above a threshold, the lead goes to sales. A good model has five to eight criteria that sales recognises.

    Can Pipedrive score leads?

    Yes, with some building. In Pipedrive you create a number field for the score and fill it through automations, and for behaviour data from your website or email tool you usually add Make. AI can add a behaviour score on top. The model itself, which criteria and which threshold, is the part that takes thought. We build it in the CRM you already use.

    What is the difference between an MQL and an SQL?

    An MQL, marketing qualified lead, fits your ICP and reached the score threshold, based on data and behaviour. Nobody from sales has spoken to them yet. An SQL, sales qualified lead, is a lead that sales spoke to and that has a confirmed need and timing. The step between the two is where most leads disappear, so it needs a written agreement with response times.

    Does a chatbot help lead conversion?

    It helps when it qualifies and hands over, not when it only answers questions. A chat that asks two or three qualifying questions, creates the lead in the CRM with the conversation attached and books a call or creates a task, shortens the time to first contact. Surge Chat does that and sends the lead to Pipedrive. A chatbot that ends in 'we will get back to you' adds little.

    What is round-robin assignment?

    Round-robin assignment gives new leads to sellers in turn, so the load is spread evenly and every lead has an owner the moment it arrives. You can add rules on top: by region, by language, by segment, or skip someone who is on holiday. In Pipedrive you build it with automations, and with Make once the rules get more complex. Without it, leads wait in a shared inbox until someone feels responsible.

    What is the difference with your marketing automation service?

    This page describes the problem and how to measure it: where leads drop off and why. The Marketing Automation service is the execution for scoring and nurture, from €2,200 in two to three weeks. Sales Automation does routing and follow-up for the same price and lead time. Most teams that struggle with lead conversion need parts of both.

    How long before we see a difference?

    The response time changes the week the rules go live, because the CRM enforces them from day one. Conversion from lead to deal takes longer to show, since it depends on your sales cycle. With a cycle of two months, you need at least one full cycle before the numbers mean something. We set the baseline in the audit so you can compare.

    Find out where your leads drop off

    The Quick Scan is free and you get the result within 48 hours. Prefer to talk first? Plan a call.

    Or call directly:+31 6 5350 9843